How to remove a broken bolt in a deep hole | remove broken bolt in recessed hole

Watch on YouTube

Show annotations

7,845,420

68,104

4,585

Genre: Howto & Style

Family friendly? Yes

Wilson score: 0.9351

Rating: 4.7477 / 5

Engagement: 0.93%

Ultimate Handyman

Subscribe | 334K

Shared September 2, 2018

It can be difficult removing a broken bolt or stud that is recessed in a deep hole as there are not many techniques to remove the bolts. Before attempting to remove any bolt, it is a good idea to shock the bolt first, then apply some heat and finally some spray penetrant (once it is cool). Drilling out the bolt is one of the few options that will work in this scenario. In this video I show two techniques that could potentially work when a bolt is broken in a deep hole or a bolt is sheared in an aluminium component.

Some more videos that might be of interest are-

How to remove a rounded Allen head bolt- https://www.youtube.com/watch?v=WDOWP...
How to remove a stripped screw- https://www.youtube.com/watch?v=_mTFQ...
How to remove a broken bolt- https://www.youtube.com/watch?v=_R1b8...
How to remove a rounded nut or bolt- https://www.youtube.com/watch?v=R5d0B...
Screw extractors | Easyouts - https://www.youtube.com/watch?v=SMrDY...
Removing a broken bolt using a welder- https://www.youtube.com/watch?v=aRrz-...
Remove a broken bolt using a left handed drill bit- https://www.youtube.com/watch?v=FYvaP...


How to make the bolt drill guide can be seen here- https://www.youtube.com/watch?v=6mZj0...